Don't you feel terrible when your mobile power button stops working and you cannot turn off or even on your phone? But don't worry, there is a way in which you might repair the power button of your mobile at home. In this blog, you will learn how to fix the mobile power button without taking it to a professional repair shop. If you are interested in the Mobile Repair Course you can also join Akinfo online and offline course.
Why Does the Power Button Stop Working?
- Dirt or Dust: Often, dirt, dust, or grime somehow gets into the phone and then the sticky or difficult-to-press situation arises.
- Wear and Tear: The power button may degrade from its repeated use over time.
- Internal Damage: Sometimes, the button cannot work appropriately because of internal damage or a loose connection.
The power button can stop working for lots of reasons:
Steps to Repair the Power Button:
Turn Off Your Mobile and Remove the Battery (if possible):
Before you start, completely switch off your mobile phone. If your device has a removable battery, remove it. This will prevent damage by accidental backpower during the repair process.
Clean the Power Button Area:
Sometimes, dirt or dust can prevent the button from being pressed. It's a good idea to use compressed air to blow out all debris surrounding the power button and clean it gently with a soft cloth and a little isopropyl alcohol.
Open the Mobile Phone:
Open your phone to reach the inner power button. Use a tiny screwdriver to remove the screws from the back of the cover. Some phones may be held with adhesive so you'll need to use a plastic opening tool gently to lift the cover off. Be careful not to use too much force that would damage your phone.
Check the Power Button Mechanism:
Open the phone, then look for the power button if it's physically stuck or damaged. You should be able to gently touch the button and see if it does something or not, maybe you can clean the debris or dust if it is so because of them. If it appears old and broken, then the button has to be replaced.
.jpg)
Check the Internal Connection:
The power button can connect through a small switch to an internal motherboard. If the button seems okay but still doesn't respond, the problem could be in the internal connection. So gently check the connection and make sure it is securely in place. If loose, reconnect very carefully.
Reassemble the Phone:
Once you have cleaned or set right the button, it is now time to put everything together by placing the back cover of your telephone and screwing it back into place. Ensure everything is tight and secure.
Test the Power Button:
Now, turn on your phone to check if the button is indeed working again. Press the button a few times. Ensure it now responds correctly. And so, if everything seems alright, your phone is good to go!
Conclusion
With the right tools and some patience, a home repair for a faulty power button on your mobile phone is achievable. Dirt, dust, or a loose connection can be repaired at no cost by the steps mentioned above. If you're not confident about fixing the problem yourself, just drop by the nearest repair shop or reach out to a specialist technician for help. You now know how to repair your mobile phone's power button. Keep your device clean and take care of it so that you do not have any problems in the future.
